Industrial & Military

The Industry’s Most Efficient Firefighting Product

INDUSTRIAL & MILITARY PRODUCTS

Looking for a specific product? Find what you're looking for here.

Fire Suppression

Fire Suppression

EXTINGUISHERS & SYSTEMS

Looking for a specific product? Find what you're looking for here.


2.5-Gallon Class A Extinguisher



FireIce extinguishers use FireIce XT, a specially formulated water-based agent that is a safe, effective and eco-friendly effective alternative to traditional ABC dry chemical agents, and does not carry the risk of inhalation, damage to skin or eyes, or harmful residues.


FireIce XT greatly enhances the capability of traditional extinguishers by acting as a force multiplier. When added to water FireIce XT produces a water enhancing gel that breaks the fire triangle by cutting off the oxygen and cooling the heat source. This prevents rekindling, which reduces property damage and increases firefighter safety.
ABC Dry Extinguishers vs. FireIce® Extinguishers:
ABC Dry Extinguishers FireIce® Extinguishers
Health Concerns Inhalation: seek medical attention; overexposure can lead to lung disease None
P.P.E ½ face mask N95 or higher / latex or nitrile gloves / coveralls None needed
Disposal Type Hazardous Waste Not hazardous
Environmental Impact Prevent from entering waterways Approved by FDA, USDA, MHSA
Chemical Content Ammonia phos-mica, silicone oil, Fuller's earth, amorphous silica, calcium Cross-linked copolymer
Discharge Distance Depending on wind: 8-12 feet Limited effect from wind: 20-30 feet
Reduced Visibility Dramatically reduces visibility None
Adhesion None Very good adhesion with limited pooling
Weight Weight varies 25 lbs.
Refilling Cost $45 - $65 at 250 PSI $35 at 125 PSI

2.5-Gallon Class A Extinguisher Products:
FireIce® XT Refills Pre-mixed; for filling and refilling XT specific equipment More ›
2.5-Gallon Class A Extinguisher Equipment:
FireIce® XT 2.5-Gallon Class A Extinguisher UL Listed, Class A Rating More ›
2.5-Gallon Class A Extinguisher Accessories:
Extinguiser Hose Kit Retrofit hose kit for 2.5-gallon water cans More ›
Extinguisher Mounting Bracket Bungee and Heavy Duty Mounting Bracket; magnetized and unmagnetized More ›
Extinguisher Bucket Bag Easy to carry and transport bucket bag for 2.5-gallon Extinguisher More ›
Extinguisher Heated Insulation Jacket Heated Insulation Jacket for the FireIce® Extinguisher; helps to prevent freezing More ›

XT 20 oz. Aerosol Spray
Cool & Contain Fire up to 5,000° F
Safe for use around pets and children, FireIce® XT is an eco-friendly, easy-to-use, easy-to-clean suppressant gel designed to quickly and efficiently coat, cool, and contain heat-related events.


Foolproof & Lightweight Design

Easy Cleanup
FireIce® XT is easy to clean with just water.

Sturdy & Reliable
High-density construction and sturdy design makes FireIce® XT 20 oz. Aerosol Spray a dependable choice for when you need it.

Intuitive Handling
Its foolproof "single-handle-direction" orientation makes the XT 20 oz. Aerosol Spray canister intuitive for anyone to use during an emergency.

Store Anywhere
A lightweight, slim profile makes it easy to store anywhere and easy for anyone to handle.

Tested for Safety & Effectiveness
Incredible Suppression
FireIce® XT 20 oz. Aerosol Spray utilizes the same powerful suppression agent as contained in the FireIce® UL-Listed Extinguisher, making it capable of containing a fire up to 5,000° F.

Fire Suppression Ratings
FireIce® XT gel has passed Custom UL 711-4OA Listing Equivalent testing.
Eco-Friendly Testing
FireIce® is deemed eco-friendly by the EPA and USDA. FireIce® has been tested by the U.S. Forest Service and is classified as non-toxic to mammals, aquatic, and terrestrial species.

Compliance
FireIce® XT is compliant with DOT 2Q DSC M5749, and contains no CFCs or VOCs per EPA & California Air Resource Board.
Personal Safety Products:
FireIce® XT 20 oz. Aerosol Spray Aerosol spray capable of containing fires up to 5,000° F More ›

30-Gallon Extinguisher
CONFINE. CONTROL. EXTINGUISH.

The 30-Gallon Wheeled Extinguisher deploys FireIce® XT gel to either swiftly suppress in direct attack, or to coat & protect surrounding assets from ignition & radiant heat for immediate & efficient containment.

Portability & Accessibility
Unit comes mounted on a wheeled trolley.
Effective discharge range of up to 60 ft.

Effectiveness
Extinguish fiberglass, carbon fiber, tires, or lithium battery fires.
Suppressant up to 5,000° F.
Up to 70% less water damage.
Adheres to virtually any surface.

Ease of Use
Pressurized and filled with 30-gallons of FireIce® XT gel, easily recharge and refill the tank after use. Refills are available to purchase in 30-gallon drums of FireIce® XT. Heater jackets are also available.

Eco-friendly
FireIce® XT is eco-friendly and non-toxic to the environment.
30-Gallon Extinguisher Products:
FireIce® XT Refills Pre-mixed; for filling and refilling XT specific equipment More ›
30-Gallon Extinguisher Equipment:
FireIce® XT 30-Gallon Extinguisher FireIce® portable solution for suppression or protection More ›

RRU
Rapid Response Unit
COAT. COOL. CONTAIN.

The Rapid Response Unit deploys FireIce XT gel for immediate and efficient containment. The RRU will allow you to quickly suppress in direct attack or coat and protect surrounding assets from ignition and radiant heat. All FireIce products are eco-friendly, non-toxic and wash off easily with just water.
Portability & Accessibility
SKID Unit.
Forklift.
Utilize 100' of hose, plus additional 75 ft. discharge range.

Effectiveness
FireIce® increases the power of water, meaning less agent and time is needed for suppression and containment.
Suppressant up to 5,000° F.
Up to 70% less water needed for knockdown than traditional water cans.

Ease of Use
Easily recharge and refill the tank or extinguishers. Extinguishers can be refilled using FireIce® XT Pre-Mixed Refills.
Rapid Response Unit Products:
FireIce® XT Refills Pre-mixed; for filling and refilling XT specific equipment More ›
Rapid Response Unit Equipment & Systems:
FireIce® XT 2.5-Gallon Class A Extinguisher UL Listed, Class A Rating More ›
FireIce® XT Rapid Response Unit Portable solution for immediate fire suppression More ›

MIST
Modular Indirect Suppression Toolkit
The 64 oz. MIST system deploys eco-friendly FireIce® XT gel to immediately suppress heavy machinery engine compartment fires while coating and protecting surrounding assets from ignition and radiant heat. FireIce® XT is eco-friendly, non-toxic to the environment, and less corrosive than competitor products.
Adaptability
Unit comes in sections that may be strategically installed in an engine compartment.
Effective in a wide variety of configurations.

Effectiveness
Extinguish combustion engine or lithium-ion battery fires.
Suppressant up to 5,000° F.
Up to 70% less water damage.
Adheres to virtually all surfaces.

Coverage
64 oz. canister provides up to 50 sq. ft. of coverage.

Ease of Use
64 oz. canister provided with 64 oz. container of FireIce® XT gel. The canister is easily filled with FireIce® XT and charged with nitrogen. Refills are available to purchase in either 64 oz. containers or 55-gallon drums of FireIce® XT.
Modular Indirect Suppression Toolkit Products:
FireIce® XT Refills Pre-mixed; for filling and refilling XT specific equipment More ›
Modular Indirect Suppression Toolkit Equipment & Systems:
FireIce® XT MIST System Modular Indirect Suppression Toolkit More ›

PMU
Portable Mixing Unit
The FireIce Portable Mixing Unit (PMU) quickly converts water to FireIce XT gel for immediate & efficient containment. The PMU will allow you to quickly suppress fire in direct attack or to coat & protect surrounding assets from ignition & radiant heat. FireIce XT is eco-friendly, non-toxic to the environment, and less corrosive than competitor products.
Concept
Water tanks are standard fire safety features at construction sites. In the event of a fire, this unit quickly plumbs into your water buffalo or tank and converts water to FireIce® XT for serious knockdown power.

Effectiveness
Extinguish a broad range of fires, including brush fires, fiberglass, carbon fiber, tires, or lithium battery fires up to 5,000° F.

Water to FireIce® XT Gel
Each 15 lb. pail of FireIce® XT can convert up to 250 gallons of water to FireIce® XT gel.

Ease of Use
Simply wheel the unit to your water source, connect the supplied hoses and begin educting FireIce® XT powder to transform the water into the best firefighting suppressant in the world.
Portable Mixing Unit Products:
FireIce® Pro Dry concentrate; for use with Pro specific equipment More ›
Portable Mixing Unit Equipment & Systems:
FireIce® Pro Portable Mixing Unit Portable Mixing Unit designed for quick mixing of water into FireIce® gel More ›

LIBASK
Lithium-ion Battery Active Suppression Kit
The Lithium-ion Battery Active Suppression Kit automatically detects elevated temperatures allowing it to cool, suppress, and prevent battery runaway. Its modular design keeps potential incidents self-contained by dispensing cooling FireIce ST gel only to compartments where temperatures reach 165° F (customizable for higher or lower temperatures). FireIce products are eco-friendly, non-toxic, and less corrosive than competitor products.



Customizable
For mass transportation, recharging, or storage. The kit is a flexible system that can be tailored to a wide variety of modular designs.

Effectiveness
FireIce® ST is effective up to 5,000° F. It helps prevent re-ignition and thermal runaway. In an event, the unit deploys, cools, and suppresses in seconds.

Penetration
FireIce® ST is designed to penetrate, cool, and suppress even where water cannot reach.
Lithium-ion Battery Active Suppression Kit Equipment & Systems:
FireIce® ST LIBASK Lithium-ion Battery Active Suppression Kit More ›

EDS
Emergency Deployment System
Where time, resources, and manpower are invaluable, eco-friendly FireIce XT outperforms traditional firefighting chemicals by offering quicker and more efficient knockdown. Its ability to adhere to virtually any surface, rapidly cool a fuel source and surrounding environment, and permanently halt the spread and prevent reignition is the difference between fighting a fire and extinguishing a fire.

Used worldwide by firefighters, first responders, and military personnel, FireIce® XT gel has been third-party tested and deemed effective on the most difficult fires, including carbon fiber, fiberglass, lithium-ion battery, metal fires, and wildfires. FireIce® XT halts fire advancement, limits steam and pooling, encapsulates harmful vapors and VOC's, rapidly cools, and reduces overall potential for fire and water-related damage.
FireIce® XT can be deployed on a fire with the FireIce® XT Emergency Deployment System (EDS). An easy to configure panel, and a setup that is customized to fit your needs, the FireIce® XT EDS can be triggered automatically with arc, temperature, or other smart sensors to extinguish fires in your business or factory quickly and safely.

FireIce XT can also be used with existing Fire Protection Systems that are currently outfitted with less effective firefighting agents, such as dry chemicals or halon. FireIce XT is also less corrosive than competitor fire suppression products, and therefore safer for your equipment and workers.

FireIce® XT is also eco-friendly and rinses clean with just plain water. All of these reasons and more is what makes FireIce® XT the preferred choice for fire protection and suppression.
Emergency Deployment System Products:
FireIce® XT Refills Pre-mixed; for filling and refilling XT specific equipment More ›
Emergency Deployment System Equipment & Systems:
FireIce® XT EDS FireIce® XT Emergency Deployment System More ›

Thermal Protection

Shield for Industrial Welding
FireIce Shield blocks heat transfer and is the ultimate defense for surface heat-related damage. While you are soldering, welding, and brazing, Shield will protect adjacent surfaces and reduce the risk of accidental charring, burning, or igniting flammable materials. It is effective up to 5,000° F.

Shield is ideal for use on metal pipes as a barrier to heat transfer, especially for valves, seals, and between contact points. Additionally, it effectively prevents discoloration and distortion of lightweight metals, and protects closely soldered parts.
Prevent
Thermal transfer.
Protect
Provides a protective layer on any medium.
Prevent Heat-Related Damage
Charring, burning, igniting, or discoloration.
Effective
Up to 5,000° F.
Safety
Improves personal safety conditions.
Re-wet & Re-use
Re-submerge the FireIce Shield® welding blanket in FireIce Shield® gel between jobs or as needed.
Easy Cleanup
Rinse away with just water.
Less Corrosive
Than competitor products, non-toxic & eco-friendly.

FireIce Shield Protection Includes


Asset Protection Line-up:
Our FireIce Shield® Welding Blanket utilizes superior 95% silica fabrication imbued with FireIce Shield® gel to prevent virtually all slag burn through while cutting, welding, or soldering, and can be re-wet and re-used to sustain temperatures up to 5,000° F

FireIce Shield® Products:
FireIce Shield® Refills Pre-mixed; for filling and refilling FireIce Shield® specific equipment More ›
FireIce Shield® Spray Pre-mixed; adhesive spray provides protection from heat transfer for all hot work More ›
FireIce Shield® Paste Pre-mixed; adhesive paste provides protection from heat transfer for all hot work More ›
FireIce Shield® Welding Blankets Pre-mixed; silica fabric provides protection from heat transfer for all hot work More ›
FireIce Shield® Equipment:
FireIce Shield® 64 oz. Canister 64 oz. Canister designed for rapid response asset protection from thermal events More ›

CTP
Communication Tower Protection


The FireIce Shield Communication Tower Protection System The FireIce Shield Communication Tower Protection System utilizes a specially formulated blend designed for use when performing work such as cutting and welding on communication towers. FireIce Shield CTP protects surfaces and cables from heat transfer, sparks and flame from the welder's torch. It also contains an advanced, colorized formulation specifically designed for better adhesion to slippery cables and tower components.





What is the CTP System?

The FireIce Shield® CTP System is a specialty mixing and deployment system designed to apply FireIce Shield® CTP on communication towers during cutting, welding, and firewatch. Each 5 lb. pail of FireIce Shield® CTP dry formula mixes to make 55 gallons of Product.

FireIce Shield® CTP is an eco-friendly fire-resistant gel that minimizes damage caused by welding sparks, fire, and slag. It is formulated with a white pigment for maximum visibility and designed for adherence to communication structures and cables.



Reduce Damage-Related Costs

Reduce direct costs of damage caused by welding sparks, fire and slag. Cool protected surfaces, limit thermal transfer, and reduce or eliminate short and long-term indirect costs resulting from unexpected service outages and, in the extreme, structural failure.

CTP Add-ons and Accessories
Prevent heat-related damage with our line of FireIce Shield® thermal barrier gel products and accessories.

Our FireIce Shield® Welding Blanket utilizes superior 95% silica fabrication imbued with FireIce Shield® gel to prevent virtually all slag burn through while cutting, welding, or soldering, and can be re-wet and re-used to sustain temperatures up to 5,000° F


FireIce Shield® Communication Tower Protection Products:
FireIce Shield® CTP Dry concentrate; designed for asset protection and containment More ›
FireIce Shield® CTP Refills Pre-mixed; refill for the 2.5 gallon CTP canister More ›
FireIce Shield® Communication Tower Protection Equipment & Systems:
FireIce Shield® CTP System Specialty mixing and deployment system designed to apply CTP More ›
FireIce Shield® CTP 2.5-Gallon Canister 2.5 Gallon Canister designed for asset protection from thermal events More ›



ICF
Industrial Cooling

A specially formulated water-based cooling formula, FireIce Shield® ICF is the most versatile and effective cooling agent available for manufacturing operations. Designed with custom applications in mind, FireIce Shield® ICF can be used with existing portable, permanent, automatic or manual cooling systems.
FireIce Shield® ICF benefits any process that uses high pressure tools or generates heat by reducing friction and heat, boosting output, lengthening tool & equipment life span, and increasing material machinability. Faster speeds, heavier cuts, courser feeds, and better microfinishes can be achieved on a wide variety of materials, including plastics, wood, and fiberglass.
FireIce Shield® ICF Products:
FireIce Shield® ICF Pre-mixed; prevents high pressure tools from generating excessive heat More ›